EK-M22
Room-temperature-curing crosslinking promoter
This product is a novel silicon–nitrogen–oxygen system compound bearing two types of reactive groups, amino and ethoxy; it is a colorless to pale-yellow transparent liquid.
FORM
Liquid additive
APPEARANCE
Pale-yellow to colorless transparent liquid
CURING
Ambient temperature / 130
Documents
TDS · SDS
The material
How this grade works and where it fits — exact parameters are defined in the TDS.
This product is a novel silicon–nitrogen–oxygen system compound bearing two types of reactive groups, amino and ethoxy; it is a colorless to pale-yellow transparent liquid. It is used to improve the interfacial bonding between inorganic materials (such as glass fiber, metals and mineral fillers) and organic polymer materials (such as resins, rubber and plastics). It significantly improves the physical and mechanical properties of composite materials, such as tensile and flexural strength, as well as their thermal stability, electrical properties and water resistance.
Used in coatings and inks, it serves as an adhesion promoter to increase adhesion, lower the curing temperature and improve corrosion protection. The product is likewise suitable for all types of glass-fiber-reinforced thermoplastic and thermosetting resins, such as PP, PA, furan resin, epoxy resin, phenolic resin, polyurethane, polyimide and polysilazane resin; the typical dosage is 0.5%–10%. It improves bonding to glass, masonry, metal and other substrates, shows good stability under complex climatic conditions together with high elongation, and can also be used in nano-silica-modified reinforcement materials.
Choose this additive to boost cure and adhesion of room-temperature systems: an amino/ethoxy-functional crosslinking promoter with a -50…280 °C service window.
Final fit is confirmed during technical review — send your substrate, operating environment and application process, and the team will confirm this grade or point you to a closer one.
Suitable for
Industrial applications within the TDS parameters
Metal, glass, ceramic and stone substrates — per grade
Professional application and curing processes
Not intended for
Consumer or DIY use — industrial B2B supply only
Conditions outside the parameters defined in the TDS
Food-contact or medical use unless explicitly confirmed
Applications
Recommended application areas for this grade, based on its TDS. Application fit is confirmed during technical review.
Used as a component within coating systems — application areas follow the host formulation. Ask the team for combination guidance.
Technical data
Key values from this grade's TDS. The complete measured data set follows below; the official document is available on request.
PROPERTY
TYPICAL VALUE
NOTES
Solid content
>97%
—
Viscosity
TBC in TDS
—
Max service temperature
-50 to 280 °C service
Depends on cure & film build
Curing conditions
Ambient temperature / 130
Per application process
Recommended film thickness
Not applicable (additive)
—
Shelf life
12 months (storage at 5–25 °C)
Storage conditions apply
Service temperature. At curing temperatures below 130 °C the product best develops the crosslinking in which it participates. Depending on the temperature resistance of the particular substrate, the temperature resistance of the coating will vary accordingly; it withstands cold–heat cycling and offers thermal-shock resistance (note: the corresponding product differs for different substrates).
Product Properties
Color and appearance: Pale-yellow to colorless transparent liquid — GB-T 1721-79
Solids content ((120±2) °C): >97% — GB/T 1725-2007
Density (g/mL): 0.942–0.946 — GB/T 6750-2007
Refractive index (nD²⁵): 1.4192–1.4200 — GB/T 2567-2008
Adhesion: Grade 0 (cross-cut) — GB-T 9286-1998
Neutral salt spray resistance: >500 h — GB-T 10125-2021
Basic Application Parameters
Product solids content (%): >97
Volatility: Solvent evaporates readily
Molecular weight: 250
Light transmittance: >91%
Theoretical coverage (m²/kg): 6–8
Curing temperature (°C): Ambient temperature / 130
Solubility: Readily soluble in toluene and other organic solvents; hydrolyzes readily on contact with water
Recommended service temperature (°C): -50 to 280
Flash point (°C): 96 °C
Storage (°C): 0–30
Data above is taken from the manufacturer’s TDS. Request the official document via the documents section below.
Substrates & storage
Compatibility and handling essentials — confirmed per grade in the TDS and SDS.
Suitable substrates
Steel and stainless steel
Aluminium and other metals
Glass and ceramics
Stone and mineral surfaces
Carbon steel, stainless steel, cast iron, aluminum alloys, titanium alloys, high-temperature alloy steels, glass-ceramic plates, ceramics, cement and similar materials, as well as plastic products, rubber products, coatings, inks, composite materials, magnetic materials, adhesives, foundry applications, etc. Note: The coating formulation differs for different substrates; within a certain range it can be adjusted and matched to the substrate and its specific service conditions.
Storage, packaging & transport
Store in accordance with national regulations. The storage environment should be dry, cool and well ventilated, away from heat and ignition sources. Packaging containers must be kept tightly closed and placed with care.
The storage temperature should be kept between 5 °C and 25 °C; the shelf life is 12 months.
Opened, partly used material must be promptly resealed with the container lid and stored sealed.
Prepared material that is not used up cannot be reclaimed and should be disposed of in accordance with local regulations.
Product past its shelf life may be used only after testing confirms it still meets specifications.
Packaging
1 kg / 5 kg / 25 kg (grade-dependent)
Transport classification
Per SDS
Application process
General guidance — exact parameters are provided in the TDS and Application Guide.
01
Surface preparation
Clean, degrease and prepare the substrate.
02
Application
Spray, dip or wipe depending on grade.
03
Curing
Cure per the TDS conditions.
04
Quality control
Verify film build and adhesion.
The application process for this grade is confirmed during technical review — request the application guide via the documents panel.
More grades
Browse the full catalogue by category, or send your requirements — we will recommend a grade for your case.
Organic Polysilazane Resins
→
Inorganic Polysilazane / Ceramic Precursors
→
Modified Polysilazane Coatings
→
Ready-to-use Ceramic Coatings
→
High-temperature Ceramic Coatings
→
Electrical Insulation Coatings
→
Fluorosilanes & Surface Modifiers
→
Adhesives
→
Additives
→
Polycarbosilane
→
SiC Fibers
→
Ordering & logistics
Common questions from procurement and engineering teams.
What packaging formats are available?
Standard packaging is 1 kg, 5 kg and 25 kg containers, grade-dependent. Other formats, minimum order quantity, lead times, shipping terms and stock availability are confirmed on request.
What is the minimum order quantity for this product?
MOQ depends on the packaging format — confirmed by our team for your grade and volume.
What happens after I send an inquiry?
Our technical team reviews your requirement and responds with a recommendation, the relevant documents and next steps.
How do I get a quotation?
Include your estimated volume and application in the inquiry — a quotation follows the technical review.
How is the product shipped?
Packaging, transport classification and shipping details are provided per SDS — request packaging and shipping information with your inquiry.