Ready-to-use Ceramic Coatings
Ready-to-apply ceramic coatings that cure at room temperature or air-dry — anti-corrosion and protective systems without oven curing. Full data per grade in the TDS, provided on request.
The grades
Grades in this family. Specifications are confirmed in the product TDS.
EK-S1000
→
High-viscosity polysilazane for thick-film industrial coatings
High-viscosity heat-curing polysilazane for films 0.1–0.4 mm thick; 1000 °C peak service after ceramisation.
EK-S13
→
High- and low-temperature resistant anticorrosive coating
One-component anticorrosive coating: 5000 h salt spray, −50…280 °C service.
EK-S1501
→
Solvent-free fast-curing polysilazane resin
Solvent-free polysilazane resin curing at room temperature; 8–9H pencil hardness for scratch-resistant, easy-clean coatings.
EK-S1502
→
Solvent-based ultra-fast-curing polysilazane resin
Solvent-based low-viscosity polysilazane; tack-free in 20–30 minutes, 7–8H hardness, water contact angle 98–104°.
EK-S1503
→
Solvent-free flexible polysilazane resin
Solvent-free flexible polysilazane for coatings that must bend without cracking — plastics and wind turbine blades.
Ekasilazane Ceramic Coat 1.0
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 5–8 months, protective properties up to 1 year.
Ekasilazane Ceramic Coat 2.0
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 8–12 months, protective properties up to 2 years.
Ekasilazane Ceramic Coat 3.0
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 12–16 months, protective properties up to 3 years.
Ekasilazane Ceramic Coat for PPF
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 8–12 months, protective properties up to 2 years.
Ekasilazane Ceramic Coat for RIMs
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 8–12 months, protective properties up to 2 years.
MIR 336 Metal · Transparent
→
Ready-to-use polysilazane coating for metal
Protective coating against oxidation and corrosion for copper, brass, bronze, stainless steel, aluminium and silver. Transparent gloss finish.
MIR 336 Stone · Transparent
→
Ready-to-use polysilazane coating for natural stone
Protective coating for natural and engineered stone; repels water, oil and dirt while keeping the natural texture visible. Transparent gloss finish.
MIR 336 Matt
→
Ready-to-use polysilazane coating for stone and metal — matt
Protective coating for stone and metal with a matt finish; repels water, oil and dirt and protects against oxidation and corrosion.
MIR 336 Semi-matt
→
Ready-to-use polysilazane coating for stone and metal — semi-matt
Protective coating for stone and metal with a semi-matt finish; repels water, oil and dirt and protects against oxidation and corrosion.
MIR 337 Metal · Transparent
→
Ultra-thin polysilazane coating for polished metal
Transparent coating for polished and mirror-finish metal; applied with polishing to a 0.1 µm film that leaves the reflection untouched.
MIR 337 Stone · Transparent
→
Ultra-thin polysilazane coating for polished stone
Transparent coating for polished and mirror-finish stone; applied with polishing to a 0.1 µm film that leaves the reflection untouched.
MIR 337 Matt
→
Ultra-thin polysilazane coating for stone and metal — matt
Ultra-thin coating for stone and metal with a matt finish; applied with polishing to a 0.1 µm film.
MIR 337 Semi-matt
→
Ultra-thin polysilazane coating for stone and metal — semi-matt
Ultra-thin coating for stone and metal with a semi-matt finish; applied with polishing to a 0.1 µm film.
MIR Antigraffiti
→
Ready-to-use anti-graffiti coating with a self-cleaning effect
Transparent anti-graffiti coating for metal, stone, concrete, painted surfaces and composites; cleaned repeatedly without recoating. Transparent or matte.
Compare grades
How the grades in this family differ. Exact values are confirmed in each product TDS.
EK-S1000
High-viscosity liquid resin
500 °C in air · 1000 °C peak
150 °C · 2–4 h
Thick films, 0.1–0.4 mm
EK-S13
One-component coating
−50 to 280 °C
120–140 °C · <2 h
Severe corrosion; no mixing required
EK-S1501
Solvent-free liquid resin
500 °C in air
Ambient · full cure 1–3 days
Hard 8–9H film, fast ambient cure
EK-S1502
Solvent-based liquid resin
500 °C in air
Ambient · full cure 3–7 days
Thin sprayable films, low viscosity
EK-S1503
Solvent-free liquid resin
500 °C in air
Ambient · full cure 3–7 days
Bend-resistant film, 3–4H
Ekasilazane Ceramic Coat 1.0
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Vehicle paint, plastic and film · 1 year
Ekasilazane Ceramic Coat 2.0
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Vehicle paint, plastic and film · 2 years
Ekasilazane Ceramic Coat 3.0
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Vehicle paint, plastic and film · 3 years
Ekasilazane Ceramic Coat for PPF
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Paint protection film · 2 years
Ekasilazane Ceramic Coat for RIMs
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Wheel rims · 2 years
MIR 336 Metal · Transparent
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Protection of metal surfaces
MIR 336 Stone · Transparent
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Protection of natural stone
MIR 336 Matt
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Stone and metal · matt
MIR 336 Semi-matt
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Stone and metal · semi-matt
MIR 337 Metal · Transparent
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Ultra-thin layer for polished metal
MIR 337 Stone · Transparent
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Ultra-thin layer for polished stone
MIR 337 Matt
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Ultra-thin layer · matt
MIR 337 Semi-matt
Ready-to-use coating
Not stated in the TDS
Ambient moisture cure · 5–7 days
Ultra-thin layer · semi-matt
MIR Antigraffiti
Ready-to-use coating
Not stated in the TDS
Ambient · full cure 5–7 days
Anti-graffiti protection, transparent or matte
* From each grade’s TDS. Final selection is confirmed during technical review.
Key properties
Typical properties of this family — exact values depend on product grade and are confirmed in the TDS.
No oven curing
Air-dry or room-temperature cure, with optional heat acceleration.
Anti-corrosion duty
Salt-spray ratings up to 5000 hours depending on grade.
Temperature range
Grades for -50 °C cold service and up to 600 °C heat.
One-component options
Most grades apply without mixing.
Thin-film protection
Effective at 8–200 µm dry film depending on grade.
Field-friendly
Suited to structures and parts coated on site.
Applications
Industrial challenges where this material family is typically evaluated.
Anti-corrosion Coatings
→
Protect metal and concrete against moisture, salt and chemical exposure.
High-temperature Protection
→
Thermal and oxidation protection for demanding environments.
Anti-graffiti / Easy-to-clean
→
Low surface energy for easy cleaning of glass, stone and metal.
Automotive Coatings
→
Industrial automotive applications and component protection.
Industrial Metal Protection
→
Corrosion, chemical and thermal protection for metal parts.
Documents
Request the documents you need, or start a guided evaluation — everything is provided per product grade.
FAQ
Common questions about this material family.
How do the grades in this family differ?
The grades differ in temperature range and application profile — exact values are in each product TDS. Send your operating conditions and we will recommend a grade.
Can I test the material before committing to volume?
Yes — sample support is available for qualified B2B projects after a short technical review.
Which substrates are compatible?
Steel, stainless and other metals are typical. Compatibility for a specific substrate is confirmed per grade in the TDS.
How is this different from conventional high-temperature paint?
Silazane-derived coatings convert to a dense ceramic layer, designed for service beyond the range of conventional organic paints. Comparative data is available on request.
What is the minimum order quantity?
MOQ depends on the product and packaging format — to be confirmed with our team for your grade.
Send request
From first enquiry to qualified bulk supply — send your requirements below.
01
Send requirement
Application, substrate and performance target.
02
Get recommendation
Suitable material family and product grade.
03
Receive TDS/SDS, catalog & sample
Documentation and sample for evaluation.
04
Test material
Validate on your substrate and process.
05
Confirm & bulk supply
Specification agreement and ongoing supply.
About ready-to-use ceramic coatings
These systems are formulated for application without oven curing — they air-dry or cure at room temperature, with optional heat acceleration. Typical duty is anti-corrosion and protective coating of parts and structures that cannot be baked.
Typical evaluation starts with the substrate, operating temperature and application process. Exact temperature limits, film thickness and curing parameters depend on the product grade and are confirmed in the TDS. Sample support is available for qualified B2B projects.