Polysilazane & Fluorosilane Product Catalog
A technical B2B catalogue — not an online shop. Browse advanced materials by product family, application and substrate, then request the full catalog or a sample.
Product catalogue
All materials in one place. Select a category to filter the catalogue.
Organic Polysilazane Resins
EK-1300
→
High-temperature curing polysilazane resin
Solvent-free heat-cured polysilazane binder and resin modifier; 5–7H, reactive with epoxy, isocyanate, amine and phenolic groups.
EK-1800
→
UV-curing polysilazane resin
Solvent-free UV-curing polysilazane; 80–85% ceramic yield, withstands 1000 °C peaks after ceramisation.
EK-S01
→
Room-temperature curing transparent silazane varnish
Transparent RT-curing varnish for electronics, easy-clean and outdoor anti-corrosion.
EK-S02.1500 RC
→
Room-temperature fast-curing polysilazane resin
Solvent-free liquid polysilazane, fast ambient moisture cure; 6–8H, water contact angle 100–110°.
EK-S02.1500 SC
→
Room-temperature slow-curing polysilazane resin
Solvent-free liquid polysilazane, slow ambient moisture cure; 6–7H, water contact angle 100–110°.
EK-S03
→
High-temperature curing agent (methylhydrogen polysilazane)
Methylhydrogen polysilazane (MW >8×10⁴) — high-temperature curing agent and crosslinker.
EK-S04
→
Methylvinylsilazane
Low-molecular silazane — amine curing agent and modifier for epoxy, alkyd, acrylic resins.
EK-S05
→
High-molecular polysilazane binder
Binder for steel coating systems; precursor for SiCN, SiCNO and SiO2 ceramics.
EK-S06
→
Polyborosilazane resin
Film-former for self-cleaning anti-corrosive coatings; air cure below 200 °C, >6H.
EK-S08
→
Solid polysilazane resin, high-temperature curing
Solid resin for ceramic-precursor routes, flame-retardant systems and HT adhesives.
EK-S10
→
Polyaluminosilazane resin
Polyaluminosilazane resin; >75% ceramic yield, also for ceramic-precursor routes.
EK-S11
→
Low-molecular methylhydrogen polysilazane
Low-molecular polysilazane (MW 177–591) for composites, impregnation and thin films.
Inorganic Polysilazane / Ceramic Precursors
EK-S08-X
→
Thermoplastic solid polysilazane for fibres and prepregs
Solid thermoplastic polysilazane with a controllable 40–120 °C softening point; precursor for silicon nitride fibre and prepreg matrices.
PHPS
→
Perhydropolysilazane
Inorganic polysilazane precursor forming pure SiO2 / glass-ceramic layers.
Modified Polysilazane Coatings
EK-M01
→
Epoxy-modified silazane coating
Paint and coating protection; room-temperature application, short-term up to 500 °C.
EK-M04
→
High-gloss modified polysilazane coating
High-gloss protective coating: ≥7H hardness, >110° water contact angle, to 200 °C.
EK-M06
→
One-component polyester-modified polysilazane resin
Polyester-modified polysilazane resin addressing toughness and bend resistance.
EK-M08
→
Silicone-modified room-temperature-curing resin
One-component silicone-modified polysilazane, room-temperature grade.
EK-M101
→
Flexible polysilazane for release and hydrophobic coatings
Flexible polysilazane rated below 600 °C in air — a step above the 500 °C liquid resins — for release coatings and hydrophobic surfaces.
EK-M102
→
Fluorine-modified polysilazane, 28–30% fluorine
Fluorine-modified polysilazane from the methyl trifluoropropyl series; 28–30% fluorine, water contact angle 105–110°.
EK-M103
→
Fluorine-modified polysilazane, 55–60% fluorine
Highest-fluorine grade in the range — 55–60% fluorine and a water contact angle of 110–120° for superhydrophobic surfaces.
EK-M12
→
Acrylic-modified hydrophobic anti-graffiti coating
One-component acrylic-modified polysilazane; anti-graffiti coating.
EK-M14
→
Hydrophobic anti-fingerprint silicone-modified resin
Nanotech-functionalized polysilazane resin; anti-fingerprint applications.
EK-M20
→
Acrylic-modified polysilazane resin
Acrylic-modified resin grade; formulation and curing data per TDS.
EK-S07
→
High- and low-temperature heavy-duty anticorrosive fluorosilicone coating
Heavy-duty anti-corrosion resin with low-temperature application; fiber sizing agent.
Ready-to-use Ceramic Coatings
EK-S13
→
High- and low-temperature resistant anticorrosive coating
One-component anticorrosive coating: 5000 h salt spray, −50…280 °C service.
EK-S1503
→
Solvent-free flexible polysilazane resin
Solvent-free flexible polysilazane for coatings that must bend without cracking — plastics and wind turbine blades.
Ekasilazane Ceramic Coat 1.0
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 5–8 months, protective properties up to 1 year.
Ekasilazane Ceramic Coat 2.0
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 8–12 months, protective properties up to 2 years.
Ekasilazane Ceramic Coat 3.0
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 12–16 months, protective properties up to 3 years.
Ekasilazane Ceramic Coat for PPF
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 8–12 months, protective properties up to 2 years.
Ekasilazane Ceramic Coat for RIMs
→
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 8–12 months, protective properties up to 2 years.
MIR 336 Metal · Transparent
→
Ready-to-use polysilazane coating for metal
Protective coating against oxidation and corrosion for copper, brass, bronze, stainless steel, aluminium and silver. Transparent gloss finish.
MIR 336 Stone · Transparent
→
Ready-to-use polysilazane coating for natural stone
Protective coating for natural and engineered stone; repels water, oil and dirt while keeping the natural texture visible. Transparent gloss finish.
MIR 336 Matt
→
Ready-to-use polysilazane coating for stone and metal — matt
Protective coating for stone and metal with a matt finish; repels water, oil and dirt and protects against oxidation and corrosion.
MIR 336 Semi-matt
→
Ready-to-use polysilazane coating for stone and metal — semi-matt
Protective coating for stone and metal with a semi-matt finish; repels water, oil and dirt and protects against oxidation and corrosion.
MIR 337 Metal · Transparent
→
Ultra-thin polysilazane coating for polished metal
Transparent coating for polished and mirror-finish metal; applied with polishing to a 0.1 µm film that leaves the reflection untouched.
MIR 337 Stone · Transparent
→
Ultra-thin polysilazane coating for polished stone
Transparent coating for polished and mirror-finish stone; applied with polishing to a 0.1 µm film that leaves the reflection untouched.
MIR 337 Matt
→
Ultra-thin polysilazane coating for stone and metal — matt
Ultra-thin coating for stone and metal with a matt finish; applied with polishing to a 0.1 µm film.
MIR 337 Semi-matt
→
Ultra-thin polysilazane coating for stone and metal — semi-matt
Ultra-thin coating for stone and metal with a semi-matt finish; applied with polishing to a 0.1 µm film.
MIR Antigraffiti
→
Ready-to-use anti-graffiti coating with a self-cleaning effect
Transparent anti-graffiti coating for metal, stone, concrete, painted surfaces and composites; cleaned repeatedly without recoating. Transparent or matte.
High-temperature Ceramic Coatings
EK-S1000
→
High-viscosity polysilazane for thick-film industrial coatings
High-viscosity heat-curing polysilazane for films 0.1–0.4 mm thick; 1000 °C peak service after ceramisation.
EK-S1301
→
Heat-curing polysilazane with 85–90% ceramic yield
Heat-curing binder resin with 85–90% ceramic yield and 8–9H hardness; base for hybrid coating systems.
EK-S1302
→
Flexible heat-curing polysilazane for resin modification
Heat-curing binder for modifying silicone, epoxy, acrylic and polyurethane resins; flexible film, contact angle 102–105°.
EK-S1303
→
Solvent-based polysilazane, full cure in one day
Solvent-based low-viscosity polysilazane with the fastest full cure in the range — one day — and contact angle 105–110°.
EK-S1501
→
Solvent-free fast-curing polysilazane resin
Solvent-free polysilazane resin curing at room temperature; 8–9H pencil hardness for scratch-resistant, easy-clean coatings.
EK-S1502
→
Solvent-based ultra-fast-curing polysilazane resin
Solvent-based low-viscosity polysilazane; tack-free in 20–30 minutes, 7–8H hardness, water contact angle 98–104°.
EK-SiBCN
→
Boron-modified polysilazane for wave-transparent and 1700 °C coatings
Boron-modified polysilazane rated to 1700 °C with wave-transparent properties and high-temperature self-healing; two viscosity grades.
Electrical Insulation Coatings
EK-D06
→
Room-temperature curing insulation coating
Insulation voltage-resistant coating curing at room temperature.
EK-D07
→
Insulating anti-corrosion blue film
Heat-resistant insulating anti-corrosion blue film; room-temperature curing.
EK-M10
→
High-toughness silicone-rubber-modified polysilazane resin (insulating, voltage-resistant)
One-component high-toughness insulating resin: ≥10⁵ V/mm; above 400–520 °C service.
Fluorosilanes & Surface Modifiers
Polycarbosilane
Cyclosilazanes
EK-S8001
→
Hexamethylcyclotrisilazane, CAS 1009-93-4
Cyclic silazane monomer for ring-opening polymerisation to high-molecular-weight polysilazanes; cyclics ≥95%.
EK-S8002
→
Trimethyltrivinylcyclotrisilazane, CAS 5505-72-6
Vinyl-functional cyclic silazane monomer; trimer ≥95%, used as a battery electrolyte additive and polysilazane precursor.
Silazane Monomers
EK-S8003
→
Hexamethyldisilazane (HMDS), CAS 999-97-3
Ultra-high-purity HMDS, assay ≥99.5% and chloride ≤10 ppm; silylating agent and photoresist adhesion promoter.
EK-S8004
→
Tetramethyldivinyldisilazane, CAS 7691-02-3
Vinyl-functional silazane monomer, assay ≥99.0% and chloride ≤10 ppm; filler modification for liquid silicone rubber.
Send request
From first enquiry to qualified bulk supply — send your requirements below.
01
Send requirement
Application, substrate and performance target.
02
Get recommendation
Suitable material family and product grade.
03
Receive TDS/SDS, catalog & sample
Documentation and sample for evaluation.
04
Test material
Validate on your substrate and process.
05
Confirm & bulk supply
Specification agreement and ongoing supply.
FAQ
Common questions from engineers and procurement teams.
What is the minimum order quantity?
MOQ depends on the product and packaging format — to be confirmed with our team for your specific grade and application.
Can I request a sample before ordering?
Sample support is available for qualified B2B projects after a short technical review of your application.
How do I receive TDS or SDS documents?
Technical and safety documentation is provided on request for the relevant product grade — use the request forms on this page.
Do you support custom formulations?
Custom formulation discussions are possible subject to technical review of your requirements.
About our polysilazane and fluorosilane materials
Quartz Master China supplies polysilazane, fluorosilane, ceramic coating and ceramic precursor materials for industrial B2B applications. Our materials support anti-corrosion, high-temperature, electrical insulation, hydrophobic and easy-to-clean coating systems on metal, glass, ceramic and stone substrates.
Engineers, R&D teams and industrial buyers use our catalogue to select materials by product family or by application. Technical data sheets, safety data sheets and application guides are provided on request for each product grade, and sample support is available for qualified projects.