Stone / Glass / Ceramic Protection
Protect natural stone, glass and ceramic against staining, water and oil absorption and weathering with polysilazane-based sealing systems. We don’t promise a universal result — we recommend a specific material for your surface and exposure, confirmed by documentation and a sample.
Recommended products
Proposed starting points — the final recommendation for your case follows technical review.
EK-M04
→
High-gloss modified polysilazane coating
High-gloss protective coating: ≥7H hardness, >110° water contact angle, to 200 °C.
EK-M08
→
Silicone-modified room-temperature-curing resin
One-component silicone-modified polysilazane, room-temperature grade.
EK-M12
→
Acrylic-modified hydrophobic anti-graffiti coating
One-component acrylic-modified polysilazane; anti-graffiti coating.
EK-M14
→
Hydrophobic anti-fingerprint silicone-modified resin
Nanotech-functionalized polysilazane resin; anti-fingerprint applications.
EK-S01
→
Room-temperature curing transparent silazane varnish
Transparent RT-curing varnish for electronics, easy-clean and outdoor anti-corrosion.
EK-S1301
→
Heat-curing polysilazane with 85–90% ceramic yield
Heat-curing binder resin with 85–90% ceramic yield and 8–9H hardness; base for hybrid coating systems.
MIR 336 Stone · Transparent
→
Ready-to-use polysilazane coating for natural stone
Protective coating for natural and engineered stone; repels water, oil and dirt while keeping the natural texture visible. Transparent gloss finish.
MIR 336 Matt
→
Ready-to-use polysilazane coating for stone and metal — matt
Protective coating for stone and metal with a matt finish; repels water, oil and dirt and protects against oxidation and corrosion.
MIR 336 Semi-matt
→
Ready-to-use polysilazane coating for stone and metal — semi-matt
Protective coating for stone and metal with a semi-matt finish; repels water, oil and dirt and protects against oxidation and corrosion.
MIR 337 Stone · Transparent
→
Ultra-thin polysilazane coating for polished stone
Transparent coating for polished and mirror-finish stone; applied with polishing to a 0.1 µm film that leaves the reflection untouched.
MIR 337 Matt
→
Ultra-thin polysilazane coating for stone and metal — matt
Ultra-thin coating for stone and metal with a matt finish; applied with polishing to a 0.1 µm film.
MIR 337 Semi-matt
→
Ultra-thin polysilazane coating for stone and metal — semi-matt
Ultra-thin coating for stone and metal with a semi-matt finish; applied with polishing to a 0.1 µm film.
MIR Antigraffiti
→
Ready-to-use anti-graffiti coating with a self-cleaning effect
Transparent anti-graffiti coating for metal, stone, concrete, painted surfaces and composites; cleaned repeatedly without recoating. Transparent or matte.
PHPS
→
Perhydropolysilazane
Inorganic polysilazane precursor forming pure SiO2 / glass-ceramic layers.
The challenge
Recognise your situation — and what it costs when protection fails.
Water, oil and airborne dirt penetrate stone, tile and ceramic surfaces continuously. When a sealing layer fails, the cost is not just recleaning — it is staining, appearance loss and costly restoration.
Conventional sealers have limits on exposed mineral surfaces. Silazane-based systems form a dense, invisible protective layer designed for longer service in these conditions — the right grade and film build are confirmed during technical review.
Typical situations
Facades and exterior stone — rain, weathering and airborne dirt
Kitchens and wet areas — oil, acids and staining agents
Floors, countertops and high-traffic mineral surfaces
Glass, tile and sanitary ceramic
How the protection works
Ceramic protection layer
Invisible barrier against water, oil and dirt
Polysilazane layer
Adhesion, curing and surface conversion
Substrate
Natural stone, glass, ceramic or concrete surface
Requirements
Properties that matter for stone, glass and ceramic protection — availability depends on product grade and is confirmed in the TDS.
Water & oil repellency
Dense layer limiting water, oil and stain penetration.
Easy-clean surface
Reduces dirt adhesion so surfaces clean more easily — per grade.
Adhesion to mineral surfaces
Reliable bonding to prepared stone, glass and ceramic.
Weathering resistance
Keeps the protective layer intact under sun, rain and UV.
Invisible finish
Where the natural appearance must stay unchanged.
Long-term durability
Designed for extended service — validated on your surfaces.
Substrates & industries
Where these systems are typically applied. Compatibility is confirmed per grade — not guaranteed generically.
Typical substrates
Natural and engineered stone
Glass and glazed surfaces
Ceramic, porcelain and concrete
Prepared / cleaned surfaces per guide
Typical industries
Facades, cladding and building envelopes
Construction and architecture
Facilities and property management
Restoration and civil infrastructure
FAQ
Common questions about stone, glass and ceramic protection projects.
Can the treatment be applied to an already stained surface?
Surface preparation requirements — including cleaning and stain removal — are defined in the Application Guide. The condition of your surface is assessed during technical review.
How is this different from a conventional sealer?
Silazane-based systems form a dense, invisible ceramic-like layer designed for demanding exposure. Comparative data for a specific grade is available on request.
How long will the protection last?
Service life depends on the exposure, film build and application quality — we validate it on your surfaces through sample testing rather than promising generic numbers.
Which product should I start with?
Send your substrate, exposure and cleaning routine — our team will recommend a grade and provide the TDS. Custom formulation is possible subject to technical review.
Can I test before committing to volume?
Yes — sample support is available for qualified B2B projects after a short technical review.
What about MOQ and pricing?
Both depend on the grade, packaging and volume — include your estimated quantity in the request and a quotation follows the technical review.
Send request
From first enquiry to qualified bulk supply — send your requirements below.
01
Send requirement
Application, substrate and performance target.
02
Get recommendation
Suitable material family and product grade.
03
Receive TDS/SDS, catalog & sample
Documentation and sample for evaluation.
04
Test material
Validate on your substrate and process.
05
Confirm & bulk supply
Specification agreement and ongoing supply.
About stone / glass / ceramic protection
Stone, glass and ceramic protection treatments seal mineral surfaces against water, oil and dirt while keeping their appearance unchanged. Polysilazane-based systems form a dense, invisible protective layer for demanding exposure.
Product selection depends on the substrate, exposure and application process. Technical data sheets, application guides and sample support are provided on request for each product grade.