EK-M01
High-temperature encapsulation compound (250–500 °C)
EK-M01 grade for potting and encapsulation at 250–500 °C.
FORM
Potting and encapsulation compound
APPEARANCE
Translucent to pale-white liquid
CURING
TBC in TDS
Documents
TDS · SDS
Primary listing: EK-M01 (Modified Polysilazane Coatings)
The material
How this grade works and where it fits — exact parameters are defined in the TDS.
The EK-M01 grade used as a potting and encapsulation compound rather than as a surface coating. Cure conditions, film build and the full performance envelope of the material are given in the EK-M01 technical data sheet — request it below for the exact data.
Fit is confirmed during technical review: send your substrate, operating environment and application process, and our team will confirm whether this grade — or a related one — matches your requirement.
Suitable for
Industrial applications within the TDS parameters
Metal, glass, ceramic and stone substrates — per grade
Professional application and curing processes
Not intended for
Consumer or DIY use — industrial B2B supply only
Conditions outside the parameters defined in the TDS
Food-contact or medical use unless explicitly confirmed
Applications
Recommended application areas for this grade, based on its TDS. Application fit is confirmed during technical review.
Recommended applications for this grade:
Technical data
Key values from this grade's TDS. The complete measured data set follows below; the official document is available on request.
PROPERTY
TYPICAL VALUE
NOTES
Solid content
TBC in TDS
—
Viscosity
TBC in TDS
—
Max service temperature
250–500 °C (potting duty)
Depends on cure & film build
Curing conditions
TBC in TDS
Per application process
Recommended film thickness
TBC in TDS
—
Shelf life
TBC in TDS
Storage conditions apply
EK-M01 supplied for potting and encapsulation at 250–500 °C. Full material data is given in the EK-M01 technical data sheet — request it via the documents panel.
Data above is taken from the manufacturer’s TDS. Request the official document via the documents section below.
Substrates & storage
Compatibility and handling essentials — confirmed per grade in the TDS and SDS.
Suitable substrates
Steel and stainless steel
Aluminium and other metals
Glass and ceramics
Stone and mineral surfaces
Substrate compatibility for a specific grade is confirmed in the TDS.
Storage, packaging & transport
Storage and packaging details for this grade are confirmed in the product TDS and SDS — request current documents.
Packaging
1 kg / 5 kg / 25 kg (grade-dependent)
Transport classification
Per SDS
Application process
General guidance — exact parameters are provided in the TDS and Application Guide.
01
Surface preparation
Clean, degrease and prepare the substrate.
02
Application
Spray, dip or wipe depending on grade.
03
Curing
Cure per the TDS conditions.
04
Quality control
Verify film build and adhesion.
The application process for this grade is confirmed during technical review — request the application guide via the documents panel.
More grades
Browse the full catalogue by category, or send your requirements — we will recommend a grade for your case.
Organic Polysilazane Resins
→
Inorganic Polysilazane / Ceramic Precursors
→
Modified Polysilazane Coatings
→
Ready-to-use Ceramic Coatings
→
High-temperature Ceramic Coatings
→
Electrical Insulation Coatings
→
Fluorosilanes & Surface Modifiers
→
Adhesives
→
Additives
→
Polycarbosilane
→
Cyclosilazanes
→
Silazane Monomers
→
SiC Fibers
→
Ordering & logistics
Common questions from procurement and engineering teams.
What packaging formats are available?
Standard packaging is 1 kg, 5 kg and 25 kg containers, grade-dependent. Other formats, minimum order quantity, lead times, shipping terms and stock availability are confirmed on request.
What is the minimum order quantity for this product?
MOQ depends on the packaging format — confirmed by our team for your grade and volume.
What happens after I send an inquiry?
Our technical team reviews your requirement and responds with a recommendation, the relevant documents and next steps.
How do I get a quotation?
Include your estimated volume and application in the inquiry — a quotation follows the technical review.
How is the product shipped?
Packaging, transport classification and shipping details are provided per SDS — request packaging and shipping information with your inquiry.