Ekasilazane Ceramic Coat for RIM
Ready-to-use ceramic coating for painted surfaces, plastic, chrome and films
Transparent ready-to-use polysilazane coating that protects against dirt, road chemicals, car-care chemistry and UV; water-repellent properties 8–12 months, protective properties up to 2 years.
FORM
One-component ready-to-use coating
APPEARANCE
Colourless to pale yellow liquid
CURING
Ambient moisture cure. Water-repellent properties develop in 12 h above 18 °C, or 24 h below 18 °C. The coating reaches all declared properties 5–7 days after application.
Documents
TDS · SDS
The material
How this grade works and where it fits — exact parameters are defined in the TDS.
Ekasilazane Ceramic Coat for RIM is a transparent, colourless, ready-to-use protective coating. It is designed to protect surfaces against dirt, road de-icing chemicals, animal droppings, aggressive car-care chemistry, weathering and UV degradation. The coating forms a durable barrier layer with pronounced water- and dirt-repellent properties and bonds chemically to the substrate. It cures at room temperature under the action of atmospheric moisture. The increased hardness allows repeated washing without degrading the coating.
Water- and dirt-repellent · easy surface cleaning · high adhesion · chemical resistance · resistance to ultraviolet radiation · economical consumption · room-temperature cure.
Choose this grade when the required service interval is 8–12 months of water repellency and up to 2 years of protection. All grades in the line share the same composition, application method and cure; they differ in service life.
Suitable for
Industrial applications within the TDS parameters
Metal, glass, ceramic and stone substrates — per grade
Professional application and curing processes
Not intended for
Consumer or DIY use — industrial B2B supply only
Conditions outside the parameters defined in the TDS
Food-contact or medical use unless explicitly confirmed
Applications
Recommended application areas for this grade, based on its TDS. Application fit is confirmed during technical review.
Recommended for vehicle bodywork and other hard non-absorbent surfaces exposed to dirt, road de-icing chemicals, animal droppings, aggressive car-care chemistry, weathering and UV. Two-stage washing is recommended: first a touchless wash with an alkaline shampoo of pH not above 12, then a contact wash with a neutral-alkaline or acidic shampoo.
Technical data
Key values from this grade's TDS. The complete measured data set follows below; the official document is available on request.
PROPERTY
TYPICAL VALUE
NOTES
Solid content
Organic polysilazane binder with functional additives
—
Viscosity
Not stated in the technical description
—
Max service temperature
Not stated in the technical description
Depends on cure & film build
Curing conditions
Ambient moisture cure. Water-repellent properties develop in 12 h above 18 °C, or 24 h below 18 °C. The coating reaches all declared properties 5–7 days after application.
Per application process
Recommended film thickness
Not stated in the technical description. Average consumption 1–2 ml/m².
—
Shelf life
24 months from the production date, stored at +5 to +20 °C
Storage conditions apply
Appearance: colourless to pale yellow. Binder: organic polysilazane. Composition: organic polysilazane with functional additives. Water contact angle 120°. Shelf life 24 months from the production date at +5 to +20 °C. Packaging: 15 ml, 30 ml, 50 ml.
Service life per the technical description: water-repellent properties 8–12 months, protective properties up to 2 years.
Curing: water repellency develops in 12 h above 18 °C or 24 h below 18 °C; all declared properties are reached 5–7 days after application. Average consumption 1–2 ml/m².
Data above is taken from the manufacturer’s TDS. Request the official document via the documents section below.
Substrates & storage
Compatibility and handling essentials — confirmed per grade in the TDS and SDS.
Suitable substrates
Steel and stainless steel
Aluminium and other metals
Glass and ceramics
Stone and mineral surfaces
Hard, non-absorbent surfaces: paint systems of various types, plastic, chrome, vinyl and polyurethane films. The substrate must be clean, dry, degreased and non-absorbent. Dry hard-to-reach areas additionally with absorbent wipes or compressed air — contact with a wet surface makes the composition react prematurely and prevents a durable protective layer from forming. Substrate temperature +5 to +30 °C.
Storage, packaging & transport
24 months from the production date at +5 to +20 °C. Packaging: 15 ml, 30 ml and 50 ml containers. The cured coating is non-flammable, odourless and harmless to health. Wear gloves and eye protection during application; if it contacts the skin, wash it off with soapy water. The instructions in the safety data sheet are mandatory.
Packaging
1 kg / 5 kg / 25 kg (grade-dependent)
Transport classification
Per SDS
Application process
General guidance — exact parameters are provided in the TDS and Application Guide.
01
Surface preparation
Clean, degrease and prepare the substrate.
02
Application
Spray, dip or wipe depending on grade.
03
Curing
Cure per the TDS conditions.
04
Quality control
Verify film build and adhesion.
Supplied ready to use. Apply in sections of 0.5–1 m² with a microfibre applicator or technical chamois and buff immediately with a microfibre cloth. One coat. Work at an air temperature of +15 to +30 °C and relative humidity not above 80 %, out of direct sunlight; the room must be dry and protected from moisture. Only trained, qualified personnel should work with the composition; a test patch on a small area is recommended before use. Average consumption approx. 1–2 ml/m². Keep water and contamination off the applicator and replace it if they appear; do not reuse an applicator. Do not use the composition if it has cured in the container or if sediment has formed.
More grades
Browse the full catalogue by category, or send your requirements — we will recommend a grade for your case.
Organic Polysilazane Resins
→
Inorganic Polysilazane / Ceramic Precursors
→
Modified Polysilazane Coatings
→
Ready-to-use Ceramic Coatings
→
High-temperature Ceramic Coatings
→
Electrical Insulation Coatings
→
Fluorosilanes & Surface Modifiers
→
Adhesives
→
Additives
→
Polycarbosilane
→
Cyclosilazanes
→
Silazane Monomers
→
SiC Fibers
→
Ordering & logistics
Common questions from procurement and engineering teams.
What packaging formats are available?
Standard packaging is 1 kg, 5 kg and 25 kg containers, grade-dependent. Other formats, minimum order quantity, lead times, shipping terms and stock availability are confirmed on request.
What is the minimum order quantity for this product?
MOQ depends on the packaging format — confirmed by our team for your grade and volume.
What happens after I send an inquiry?
Our technical team reviews your requirement and responds with a recommendation, the relevant documents and next steps.
How do I get a quotation?
Include your estimated volume and application in the inquiry — a quotation follows the technical review.
How is the product shipped?
Packaging, transport classification and shipping details are provided per SDS — request packaging and shipping information with your inquiry.